SMC CRA1 Series Rotary Actuator, Rack and Pinion Type, CDRA1BS50-90CZ-A93 Type_18^Self-Aligning Ball Bearings Reading accuracy (°): ± 0

Reading accuracy (°): ± 0

an oil groove should be located in the housing bore since depth for the groove in the bearing is limited

Specification item model symbol Specification information built-in magnet D built-in magnet tube inner diameter 125 Tube inner diameter 125mm Types of port screws - Rc cylinder stroke 50 cylinder stroke 50mm body options - Standard (rod end female thread) Auto switch mounting groove Z 4 sides auto switch A93L Reed auto switch

Specification item model symbol Specification information built-in magnet - No built-in magnet installation support B Through hole (standard) tube inner diameter 16 tube inner diameter 16mm Types of port screws - Rc/M screw cylinder stroke 5 cylinder stroke 5mm how it works S single acting forward type body options - Standard (rod end female thread) Auto switch mounting groove - No auto switch mounting groove Installation bolts included - no mounting bolt rod end bracket - no metal fittings auto switch - Without auto switch Auto switch additional symbol - 2 with or without Custom made specifications - standard

Set your own combination convenience - no reset tool required

SMC CRA1 Series Rotary Actuator, Rack and Pinion Type, CDRA1BS50-90CZ-A93 Type_18^Self-Aligning Ball Bearings Reading accuracy (°): ± 0OVERVIEW The CRA1 rack & pinion rotary actuator offers very high torque to size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9. 65" X 4. 41". Single shaft end or double shaft end models are available. Can be mounted on 2 sides of a small auto switch ( D M9 type ) Can be mounted from the front of the auto switch UZ,