GKTECH INDIVIDUAL 12.8MM +20MM EXTENDED WHEEL STUDS Complete This is entirely dependent on

This is entirely dependent on both the inside diameter of the rim and the length/type of tie rod that you are running however as a general rule a 17" rim or larger will be required

For temperature measurement please use a pull-up resistor with an optimal value of 4

63")  Diameter Ø 55mm (2

You can screw this directly into the top of the turbo (when available) or into one of our oil feed flanges that bolt onto the turbo

Volt 6                Analog 0-5V input

GKTECH INDIVIDUAL 12.8MM +20MM EXTENDED WHEEL STUDS Complete This is entirely dependent onListing is for: 1x Wheel stud When modifying your car, it's common to use wheel spacers. If you are using slip on spacers, it is recommended to change your studs to accommodate for the loss of thread on the standard studs. Wheel studs are an important part of your car, don't overlook the fact that even a 5mm slip on spacer can still create excess stress on your studs. Not only are you reducing excess stress, but you are also ensuring there is a safe