uBLOX MAX-M8C Pico Breakout with Chip Antenna GPS acquisition time after power-up

GPS acquisition time after power-up is around 30 seconds

126 dBc/Hz at 100 Hz

6 dB max insertion loss (above the -4

This metal case for Raspberry Pi 5 includes an external start button

Supplied as github repository with instruction

uBLOX MAX-M8C Pico Breakout with Chip Antenna GPS acquisition time after power-upThe board is assembled with a uBLOX MAX M8C 10 module, chip antenna and a decoupling capacitors. This board has VCC, GND and RX & TX, SCL & SDA for I2C. IMPORTANT : This module has no onboard voltage regulation so a clean regulated 1. 8 3. 6v power is required. If you want to link this to your microcontroller you must ensure it runs at 1. 8 to 3. 6v on the serial I2C or you will risk damaging this module. Arduinos PC Serial generally run at 5V so you