Schwenk 30800001 Indicating plug Gauge OD Range 100.1-110 mm h=1.2 Ø, Sleeve Dimension H=33.00mm, Blind Hole Version CAL4 B16 will move off centre with

will move off centre with a decided wobble

With a dual-display design setup values can be continuously monitored

A setting standard (optional) is needed to accurately set the micrometer to the reference point

The Mitutoyo 172-144 workpiece fixture is suitable for Profile Projectors and Measuring Microscopes

Length (L): 1375 mm

Schwenk 30800001 Indicating plug Gauge OD Range 100.1-110 mm h=1.2 Ø, Sleeve Dimension H=33.00mm, Blind Hole Version CAL4 B16 will move off centre withApplication For quick comparison measurements of bores during series inspections. The slightly undersized, ground sleeve is used to guide and centre the plug gauge in the bore. Execution Cemented carbide measuring contacts and measuring needles (wear resistant) Plug gauge from dia. 130 mm can be supplied as a cross shaped sleeves or cross shaped sleeves with skids Version for blind holes with reduced face size Advantage Easy to use Minimum measuring