1-3/4" X7RJBS Bearing Carrier 2P 9 Short Wheelbase Electronics we recommend 600-5010 due to

we recommend 600-5010 due to a slight performance advantage

2 valving on rebound and 2 valving on compression

1" barbed ends with an M10 port for the MyChron water temperature sensor (604-201) and a 1/2" NPT port used for the oil cooler line

Accepts 25-544 threaded dust cap (not included)

Front torsion arms are measured from the center of the splined torsion bar hole to the end of the arm

1-3/4" X7RJBS Bearing Carrier 2P 9 Short Wheelbase Electronics we recommend 600-5010 due toHyper Racing # 05 1254S For 1 3 4" Splined Rear Axle. Fits the X7 Chassis on the right side. Use when configuring for the Jacobs ladder, short wheelbase, rear axle forward location. Use this bearing carrier to mount the 2 piston Wilwood Dynalite Single brake caliper 36 100 with the 9 1 4" rotor. CNC machined Bearing Carrier includes double row angular contact bearing, bubble level, and grease fitting. Control arm mount distance is 6". We recommend the