Blackmagic Design Spares - ATEM 2M/E Panel - PCB Main Int P/S Professional Cameras Always clean the fiber tips

Always clean the fiber tips with a dedicated cleaner before assuming there is a hardware failure in the converter itself

Use a quick wipe of Isopropyl Alcohol if you accidentally touch them

high-impact buttons used for the CUT and AUTO transition functions

the Battery PCB is the rigid board that contains the physical contact pins and the "handshake" logic for the battery

Weighted T-Bar Fader: A professional

Blackmagic Design Spares - ATEM 2M/E Panel - PCB Main Int P/S Professional Cameras Always clean the fiber tipsThe Blackmagic Design Spares ATEM 2 M E Panel PCB Main Internal Power Supply is the internal voltage regulation and distribution board for the legacy 2 M E Broadcast Panel. In these large format panels, there is typically a two stage power system: an AC DC Power Module (the "Brick" inside the unit) and this Main Internal P S PCB. This board acts as the "heart," taking the raw DC voltage and filtering it into the specific rails (e. g., $3. 3\text{V}$,