Digispark USB Development Board - ATtiny85 Clone outdoor It fits well into maker

It fits well into maker

With a pitch of 2

DC6-24v wide voltage power supply

02 mm tolerance) Spool Weight 1 kg (net weight) Color Blue Recommended Nozzle Temp 230–260 °C Recommended Bed Temp 90–110 °C Recommended Print Speed 40–80 mm/s Heated Bed Required Yes Enclosure Recommended Yes What's in the box

Sensing range: 0KPa ~ 40KPa

Digispark USB Development Board - ATtiny85 Clone outdoor It fits well into makerTiny ATtiny85 dev board the size of a coin, with a USB A plug built right onto the PCB. No cable, no separate programmer. Plug it into a USB port, program it from the Arduino IDE. Great for small always on gadgets and USB tricks where a full Uno is overkill. Specs MCU ATtiny85 I O 6 pins (2 shared with USB) Flash 8KB (~6KB after bootloader) Power USB, or 5V 7 35V external (auto select) Regulator 500mA 5V onboard Buses I2C and SPI (via USI), PWM on 3