Rudder Sensor YDRA-01 Connector:NMEA-2000 DeviceNet but are available to all

but are available to all NMEA 2000 devices on the vessel

routing rules

where a problem with the alternator or voltage regulator of your engine is detected when the battery is already nearly dead

1m (3ft) “Drop Cable”

The Multiplexer has six configuration presets with different port speeds and routing schemes

Rudder Sensor YDRA-01 Connector:NMEA-2000 DeviceNet but are available to allRudder Adapter YDRA 01 The NMEA 2000 Rudder Angle Adapter YDRA 01 allows you to connect an existing resistive type rudder angle sensor installed on a rudder and supply NMEA 2000 autopilots, chart plotters and other devices with the rudder angle. The Device can be used with a rudder angle sensor with maximal resistance less than 400 Ohm, including European (10 to 180 Ohm range) or American (240 to 33 Ohm range) standard sensors, and with 0 5V voltage