Smooth-On FOAM-iT! 5 3d scanning Apply Ease Release 2300 using

Apply Ease Release 2300 using aerosol spray or spray equipment for bulk grades

Curing - Allow the rubber to cure at room temperature (73°F/23°C) before removing from model surface

Be careful…too much water will may result in the mixture not curing

Ettore's Professional Progrip Window Cleaning Kit consists of one 12" Progrip squeegee

disinfects and deodorizes

Smooth-On FOAM-iT! 5 3d scanning Apply Ease Release 2300 usingSmooth Ons FOAM iT! Series are two component water blown rigid foams that are versatile and easy to use. FOAM iT! products are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which FOAM iT!