Screw In Bolt Thermocouple, M6, M8, M10, M12 Thread Type:J The immersion length is measured

The immersion length is measured from the base of the thread to the tip of the thermowell

Configuration is performed quickly using our USB port driven configurator by simply connecting two clips to the SEM206P loop terminals and following the software instructions

Window: Laminated Safety Glass

Pressure Element: CU alloy

the pressure is transmitted to the gauge via the system fill fluid which is inside the diaphragm seal assembly

Screw In Bolt Thermocouple, M6, M8, M10, M12 Thread Type:J The immersion length is measuredFast response screw in bolt thermocouples for direct temperature measurement up to 400C. The bolt sensor is designed to screw directly into the application to get a faster response and more accurate reading than surface measurement sensors. Available in bolt sizes M6, M8, M10 or M12 with a thread length of 10mm below the hexagon in either a standard fixed thread or a swivel style thread, the later prevents wires from twisting when screwing the bolt